Yesterday I started showing you how to make your own tiny Hylian Shield from the Legend of Zelda Ocarina of Time. Today I am back to finish up the tutorial.
Step 6: Detailing What would the Hylian Shield be without its fine detailing? A Deku Shield? There are a lot of options for adding details to the center of your shield. With this smaller shield, I chose to use a combination of materials. For the Triforce, I used some thin cardboard. For the bird motif, I used my hot glue gun to paint the design. If you are not very good at freehand-drawing, I would suggest cutting out the design from your template. This was a little tricky, but I am pleased with the results. I may try something different on the larger shield, though.
The glue gun added a nice texture, but was difficult to control.
Step 7: Prime This is especially important if working with cardbard. The dark surface will be difficult to paint if you do not prime it.
The front after one coat of primer.
Be sure to get the front and the back. Let it dry completely between coats if a second coat is necessary.
The back of the shield after one coat of primer.
Step 8: Spray Paint Now it’s time for the fun part. Once you’ve let your coat of primer dry completely, you can add a coat of your Hammered Spray Paint. This paint is textured and does a great job of covering most surfaces evenly. I did not have any problems with my shield, but you may need to touch-up or add a second coat of paint. Be patient and let each coat dry before applying the next one.
Also, if you did cover the outside of the shield with masking tape, bear in mind that the paint will remain tacky there for a little while longer than it does on the cardboard. Be mindful of this when setting the shield down on surfaces while it dries.
Paint both sides of the shield.
Shield front after one coat of Hammered Silver paint.
Step 9: Paint and Detail. Once your silver paint has dried, it is time to add detail to the shield. I used a variety of small brushes and my acrylic paints to add the color to the front of the shield. I did the blue base first and then painted the red bird and Triforce, leaving the silver parts
Carefully adding blue paint.
Don’t forget to paint the back!
You may need to add several coats of paint. Depending on the type of paint you are using, you may also want to cover the shield in a clear gloss coat. As all of my paints were glossy, I did not do that for my shield. Once the paint has dried on the front and the back, it is time to add some hardware. On this small shield, I added a little loop to be used to hang or secure the shield. On a standard-size shield, it is even more important to add the correct hardware. This small loop will do for now, but if you make a larger shield in the future, be sure to make the straps and handle more secure.
Brads have proven to be very useful for this project.
Step 10: Sit back and admire your handy-work. Even if you have never touched a tool in your life, this project can be easy enough for any skill level. While this shield may not be big enough to defend yourself from even the smallest of Deku Shrubs, it is cool enough to display in your home or office. Many materials are ones that you may have on-hand.
With the leather loop on the back, you can easily hang this small shield somewhere where it can be seen!
I hope this tutorial was helpful! If you have any questions regarding the instructions or photographs please let me know. Share your finished projects too!!!
Page Redford 